- #Simatic wincc flexible 2008 sp2 iso full dvd serial
- #Simatic wincc flexible 2008 sp2 iso full dvd software
2 GHz (in accordance with IEC 6) 1 V/m, with 80% amplitude modulation with 1 kHz, 2.0 GHz. 3 V/m), with 80% amplitude modulation with 1 kHz, 80 MHz. 80 MHz (in accordance with IEC 6) 10 V/m (with modem operation max. 3 V), with 80% amplitude modulation with 1 kHz, 10 kHz. Tested in accordance with IEC 6, IEC 6 Half-sine 50 m/s2, 30 ms, 100 shocks Half-sine 250 m/s2, 6 ms, 1000 shocksĮN 6:2007, EN 6 Class D and EN 6 ± 2 kV (according to IEC 6 burst) ± 1 kV (according to IEC 6 surge sym./line to line) ± 2 kV (according to IEC 6 surge sym./line to ground) ± 1 kV (according to IEC 6 burst length 30 m) ± 2 kV (according to IEC 6 surge sym./line to ground length > 30 m) ± 4 kV discharge on contact (in accordance with IEC 6: ESD) ± 8 kV discharge to air (in accordance with IEC 6: ESD) 10 V (with modem operation max. Immunity to high radio frequency interference.Immunity to conducted interference on the supply lines.Storage/transport Electromagnetic compatibility (EMC).Tested in accordance with IEC 6 10 to 58 Hz: Amplitude 0.0375 mm, 58 to 500 Hz: Acceleration 4.9 m/s2 5 to 9 Hz: Amplitude 3.5 mm 9 to 500 Hz: Acceleration 9.8 m/s2 ■ Technical specifications (continued) SIMATIC Field PG M3 TemperatureĪmbient conditions Degree of protection in accordance with IEC 60529 For operation outside these countries, the relevant national regulations must be observed. The integral wireless LAN is approved for operation in Europe (CE), USA (FCC), Canada (IC) and China (CCC). Integral WLAN with antennas specially designed for the Field PG M3. We recommend replacing the battery with an original Siemens battery at the end of these six months if there is a significant drop in performance. For the battery's operation we grant a warranty of six months. Capacity loss is not covered by the warranty. In normal use the battery can be charged and discharged over a period of six months from when the field PG is purchased. The running time per charge decreases therefore in the course of time. The capacity of the battery decreases for technological reasons with each charging/discharging operation and also as the result of being stored at excessively high or low temperatures.
#Simatic wincc flexible 2008 sp2 iso full dvd serial
2 high current (500 mA) for each interface block, only 1 interface can be used for high currentġ interface for external monitor (VGA monitors can be operated with a DVI/VGA adapter)Ĭonnection in each case for 3.5 mm stereo jackĢ.5" serial ATA with 250 GB or 500 GB easily replaceable Interface for SMC (SIMATIC Memory Card) SD/SHC xD-Picture Card MS Proĥ interfaces for high-speed universal serial bus.
![simatic wincc flexible 2008 sp2 iso full dvd simatic wincc flexible 2008 sp2 iso full dvd](https://download.ir/wp-content/uploads/2017/09/Siemens-SIMATIC-WinCC-Flexible-2008-SP5_www.download.ir_2.jpg)
Programming interface for SIMATIC Memory Card and S5 memory module (S5 EPROM module as optional equipment version) V.24/TTY (for SIMATIC S5 TTY as optional version) over supplied adapter on 9-pin sub-D male connector
![simatic wincc flexible 2008 sp2 iso full dvd simatic wincc flexible 2008 sp2 iso full dvd](https://mertqcolour.weebly.com/uploads/1/3/3/5/133515969/632740964_orig.jpg)
Wide-range power supply unit 100-240 V AC, 50-60 Hz, high-power lithium-ion battery 71 Wh (running time up to 3 hours)Ģ4 months for hardware components (6 months for battery1)ĬP 5611-compatible, 9.6 Kbit/s to 12 Mbit/s, 9-pin sub D socket MUI (Eng, Ger, Fr, Sp, It additional languages can be installed later)
![simatic wincc flexible 2008 sp2 iso full dvd simatic wincc flexible 2008 sp2 iso full dvd](https://2.imimg.com/data2/NC/UW/MY-1823298/wincc-flexible-6es7657-0xx06-0ye0-500x500.gif)
#Simatic wincc flexible 2008 sp2 iso full dvd software
Communication software SOFTNET for PROFIBUS SOFTNET for Industrial Ethernet SOFTNET PN IO OPC server for Industrial Ethernet SNMP OPC serverīrochures For brochures serving as selection guides for SIMATIC products refer to: printmaterial Siemens ST 70